DispPro 3000 - Software - Bungard Elektronik GmbH & Co.KG

For all Bungard CCD machines

DispPro 3000

The dispensing module DispPro 3000 is an extension of the CCD for dispensing solder paste or glue. Instead of being controlled by a foot switch, a pneumatic manual dispensing unit is controlled over the software RoutePro 3000. A dosing cartridge of the dispenser is mounted into the holder of the high-frequency spindle. The module is not a fully automatic dispensing unit, but a dosing aid for a manual dispenser. The machine drives precisely to each dosing point and dosing time dosing height are precisely controlled. Further settings like viscosity control and control of the dosing volume are not supported. The control of these parameters is subject to the user.

Requirements:

  • a Bungard CCD
  • the Software RoutePro 3000
  • a dispensing license DispPro 3000 (scope of delivery dispensing license)
  • a potential free switch contact to connect the the dispenser to the CCD (scope of delivery dispensing license)
  • a manual pneumatic dispenser
  • connection to compressed air

 

Operation

To use the dosing function, you need to connect the dispenser via a potential-free contact to the CCD and activate a dispensing license. The dispenser moves along HPGL-vectors for line dispensing (similar to routing) and Excellon drill points for dot dispensing. With dot dispensing the size of the dot is defined by the distance over the board and the dosing time. In addition you can adjust the dosing pressure at the dispensing unit. A fine adjustment can be achieved over the lifting speed of the z-axis. With line dispensing the thickness of the line is defined by the distance over the board and the dosing speed. In addition you can adjust the dosing pressure at the dispensing unit.

Safety regulations

Pay heed to the safety regulations of the Bungard CCD
Pay heed to the safety regulations of the dispensing unit
Read the Material Safety Data Sheets of your solder paste and glue

Techn. Data

Control: Via Bungard CCD/RoutePro 3000

Requirements: Bungard CCD, Software RoutePro 3000, Dispensing license DispPro 3000 for RoutePro 3000, Connection to compressed air

Application: Dosing of solder paste and glue

Techn. Data dispensing unit

Dimension: 220 x 210 x 67mm

Weight: 1 kg

Input Voltage: 100 – 240 VAC

Internal Voltage: 24 VDC

Air inlet: 5-7 bar

Air outlet: 0,1-7 bar

Hold back vacuum: Non-Drop System

To use the dosing function, you need to connect the dispenser via a potential-free contact to the CCD and activate a dispensing license. The dispenser moves along HPGL-vectors for line dispensing (similar to routing) and Excellon drill points for dot dispensing. With dot dispensing the size of the dot is defined by the distance over the board and the dosing time. In addition you can adjust the dosing pressure at the dispensing unit. A fine adjustment can be achieved over the lifting speed of the z-axis. With line dispensing the thickness of the line is defined by the distance over the board and the dosing speed. In addition you can adjust the dosing pressure at the dispensing unit.

Modules for RoutePro 3000

Bungard Elektronik GmbH & Co.KG
fas fa-map-marker

Rilkestrasse 1
D-51570 Windeck

fa fa-fax

+49 2292 / 9 28 28 - 29